Triple Benchtop – With Sediment, Fluoride and Disruptor® Filters

System: 400W x 300H x 130D (mm)

Filters: 9″ x 2.5″ Each.

• Sediment Filter – Contaminant Reduction
  – Particles >1 micron………..…99.99%

• Fluoride Filter – Contaminant Reduction
  – Fluoride………………………………97%

• Disruptor® Filter – Contaminant Reduction– PFOA (Perfluorooctanoic Acid) > 98.9%
  – PFOS (Perfluorooctane Sulfonic Acid) > 99.0%
  – Total Chlorine (Chloramines) > 99.3%
  – Free Chlorine > 99.5%
  – Lead (Pb) > 99.5% @pH 6.5
  – Lead (Pb) > 99.4% @pH 8.5
  – Copper (Cu) > 99.9% @pH 8.5
  – Copper (Cu) > 99.9% @pH 6.5
  – E.Coli (Total Coliforms) > 99.9999%
  – Coliphage (Bacterial Virus) 99.9995%

Learn more about Disruptor®

• 1st Stage Filter: 100% Polypropylene Triple Gradient Sediment filter.
  • Captures Dust, Sediment, Mud, Dirt, Rust, Sand, Slit, and Algae (Particles greater than 1 micron).
  • Mechanical Filtration
  • Capacity: Dependant on water quality (1 year approx.)
  • Porosity: 10um (outer layer). 5um (middle layer), 1um (core)

• 2nd Stage Filter: 100% Activated Alumina Fluoride Removal Filter.
  • Capacity: 800 Litres (6 Months)
  • Capable of filtering 97% of the fluoride and other unwanted chemicals within your water supply.
  • Porosity: 5 Micron Nominal

• 3rd Stage Filter: Our advanced 3rd Stage Filter combines premium-grade activated carbon with a submicron membrane, delivering exceptional purification performance.
  • Capacity: Filters up to 7,000 litres at 0.3 mg/L of iron with a flow rate of 3 LPM.
  • Technology: Integrates mechanical, electro-adsorptive, adsorption, and nanofiltration processes in a single cartridge.
  • Versatility: Designed for use with tap/town water, rainwater, spring water, dam water, and river or creek water.
  • Protection: Captures viruses, bacteria, and parasites smaller than 2 microns through advanced electro-adsorption.

• To ensure optimal performance and hygiene and to prevent build up of contaminants, we recommend that filters are not used any longer than 12 months. However, replacement frequency depends on water quality and usage.
• Filters should also be changed when rated capacity is reached, or when flow becomes too slow.

Replacement Filters

• 📎Replacement Filters for the Triple Benchtop – With Sediment, Fluoride and Disruptor® Filters

Kitchen Faucets Compatible with the Countertop Water Filter:

Countertop Water Filter Tap Fittings:

FITS ON SINGLE HANDLE OR DOUBLE HANDLE FAUCET

IF YOUR FAUCET IS WITH INNER THREADS OF SPOUT

1. TAKE OFF THE AERATOR FROM THE FAUCET

2. PUT THE ADAPTOR AND RUBBER WASHER INTO THE FAUCET AND TIGHTEN IT

3. REVOLVE DIVERTER VALVE INTO THE ADAPTOR

IF YOUR FAUCET IS WITH THREADS OUTSIDE OF SPOUT

1. TAKE OFF THE AERATOR FROM THE FAUCET AND REVOLVE THE DIVERTER VALVE INTO THE FAUCET DIRECTLY. PLEASE CHECK IF THERE IS AN O-RING INSIDE THE DIVERTER VALVE.

TO FIT TO NON-THREAD FAUCET

IF YOUR FAUCET IS 1/2″ OD ABD WITHOUT THREAD

1. INSERT RUBBER INTO EXTERNAL ADAPTOR.

2. PUT EXTERNAL ADAPTOR ON THE FAUCET AND TIGHTEN THE NOSE CLAMP BY SCREWDRIVER.

3. REVOLVE THE DIVERTER VALVE INTO THE EXTERNAL ADAPTOR.

IF YOUR FAUCET IS 3/4″ OD AND WITHOUT THREAD

1. PUT EXTERNAL ADAPTOR ON THE FAUCET AND TIGHTEN THE HOSE CLAMP BY SCREWDRIVER (NO NEED RUBBER)

2. REVOLVE THE DIVERTER VALVE INTO THE EXTERNAL ADAPTOR.

What does the Triple Benchtop includes?

• 1 x Diverter Valve (Fits 22mm)
• 1 x Ctop Adaptor (Connects 22mm Female Spouts)
• 1 x White/Blue 1/4″ Tube
• 1 x Spanner (Opening tool for maintenance)
• 3 x White Housings
• 1 x Ctop Stand Triple
• 1 x Inlet 1/4″
• 1 x Chrome Spout with Outlet 1/4″
• 3 x Filters Cartridges (inside)

What are the Sediment Filter specifications?

• Polypropylene filter for removal of sand, silt, dirt and rust particles. For water use only.
• 1 Micron Filtration
• 100% Polypropylene material for wide chemical compact
• True multi-layered depth filtration
• Three layers structure cartridge, high contaminant holding capacity, long filter service life.
• Micro-Denier-melt-blown filtration fiber, high removal ratings.
• Formed by thermal bond without use of any fibers or adhesives.
• Certified by NSF 42 and FDA CFR Title 21.

What is the Fluoride Filter Removal efficiency?
97% Removal Efficiency

Can I run my system with hot water?
Running hot water through your water filter system will damage your filter cartridges making them useless.

⚠️  This system is for use on cold water line only. Hot water may damage the system.

• Min. Operating Temperature: 0.6 °C
• Max. Operating Temperature: 38 °C
• Min. Working Pressure: 25 psi
• Max. Working Pressure: 125 psi
• Flow Rate: 3 LPM

• For Cold water use only. Install on COLD water lines only.
• Never install or operate where inlet water pressure may exceed 120 psi (827kPa)
• Protect from freezing. Remove filter if temperature drop below 1°C.

• Sediment Filter Certifications:

Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

• Fluoride Filter Certifications:

Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

• Disruptor® Filter Certifications:

Tested with SGS Laboratory Testing Services
Tested to NSF/ANSI 42 & 53 aesthetic effects and health effects testing.

Note: