TWIN BENCHTOP – WITH FLUORIDE AND CARBON FILTER

TWIN BENCHTOP – WITH FLUORIDE AND CARBON FILTER

Installation Set Up

Fits on a single-handle or double-handle faucet if your faucet has inner threads of the spout.

1. Take off the aerator from the faucet.
2. Put the adapter and rubber washer into the faucet and tighten it.
3. Revolve the diverter valve into the adapter.

If your faucet has threads outside of the spout:

1. Take off the aerator from the faucet and revolve the diverter valve into the faucet directly. Please check if there is an O-ring inside the diverter valve to fit a non-thread faucet.

If your faucet is 1/2″ OD and without threads:

1. Insert rubber into the external adapter.
2. Put the external adapter on the faucet and tighten the nose clamp with a screwdriver.
3. Revolve the diverter valve into the external adapter.

If your faucet is 3/4″ OD and without threads:

1. Put the external adapter on the faucet and tighten the hose clamp with a screwdriver (no need for rubber).
2. Revolve the diverter valve into the external adapter.

How often should I replace the cartridges?

• It is advised to replace the Fluoride Filter cartridge every 6-12 months.
• The Carbon Block can be replaced every year.

Contents:

• 2 x 9” x 2.5” Water Filter Housing Sump
• 1 x Ctop Stand
• 1 x Ctop Inlet
• 1 x Ctop Hose
• 1 x Ctop Adaptor
• 1 x Diverter
• 2 x Filter Cartridges
• 1st Stage: OMNIPURE FLUORIDE FILTER
• 2nd Stage: CARBON BLOCK FILTER CARTRIDGE