AquaCo Reverse Osmosis High Alkaline Water Filtration System (RO)

Rejects all salts and inorganic molecules, as well as organic molecules. It is therefore the most effective process for removing contaminants such as: Endotoxins/pyrogens, Insecticides/pesticides, Herbicides, Antibiotics, Nitrates, Sugars, Soluble salts, and Metal ions.  See RO Membranes Contaminant Removal List

• Stage 1: Sediment Pre-Filter – Replace every year

Removes dust, dirt, sediment, rust and sand to protect the carbon pre-filter.

• Stage 2: Carbon Pre-Filter – Replace every year

Removes Herbicides, Pesticides, Chlorine and Chemicals to protect the membrane.

• Stage 3: Ultrafine TFC RO Membrane – Replace 3 years

The RO membrane acts as a barrier to all salts and inorganic molecules, as well as organic molecules.

It is, therefore, the most effective process for removing contaminants such as fluoride, heavy metals, such as lead, mercury, copper, arsenic, aluminium, cadmium, and other pollutants of concern like pesticides, silica, hardness and salts. 

• Stage 4: Carbon Polishing Post-Filter – Replace every year

Generates and supplies outstanding tasting water.

• Stage 5: Alkalising Filter – Replace 2 years

Successfully raises pH levels (Resulting pH >9) along with producing antioxidant and oxygenating qualities.

AquaCo Reverse Osmosis Replacement Filters

• Stage 1: Sediment Pre-Filter – Replace every year
• Stage 2: Carbon Pre-Filter – Replace every year
• Stage 3: Ultrafine TFC RO Membrane – Replace 3 years
• Stage 4: Carbon Polishing Post-Filter – Replace every year
• Stage 5: Alkalising Filter – Replace 2 years

AquaCo Reverse Osmosis Installation Images

Dedicated Tap – Installation Images

3 Way Mixer – Installation Images

AquaCo Reverse Osmosis Installation Guide

Usually the system is installed standing under the kitchen sink. This ensures a cost efficient fast installation. Where height is an issue, the system can be installed laying down as well. See installation diagram. 

• System Dimensions: 360W x 430 H x 320 D(mm)
• 8L Capacity Reverse Osmosis Tank Dimensions: 244 D x 366 H (mm)
  • You can upgrade your tank size to 12L for only $50.
• Dedicated Drinking Faucet Dimensions: 292 H x 80 W x 130 D (mm)
  • Instead of having a separate faucet for filtered water, consider having a 3 Way Mixer to avoid drilling a hole through your stone/wood bench.

• Model: AquaCo Reverse Osmosis
• Part Number: SYS-RO925TM5
• Filtration Method: Mechanical, Adsorption, and Reverse Osmosis
• Filter Size: 9″ x 2.5″
• Filtration Stages: 5
• Brand: AquaCo
• Connection Type: 1/4″
• Maximum Operating Pressure: 80 psi
• Minimum Operating Pressure: 35 psi
• Final Flow Rate: 3LPM out of the Tank
• Membrane Flow Rate: 16 L/H
• Connects To: Cold Water Line
• System Dimensions: 360W x 430 H x 320 D(mm)
• 8L Capacity Reverse Osmosis Tank Dimensions: 244 D x 366 H (mm)
  • You can upgrade your tank size to 12L for only $50.
• Dedicated Drinking Faucet Dimensions: 292 H x 80 W x 130 D (mm)
  • Instead of having a separate faucet for filtered water, consider having a 3 Way Mixer to avoid drilling a hole through your stone/wood bench.

If your water pressure is under 35 psi, you may be required to fit a booster pump.

Accessories Included

• 3 x Water Filter Housings/Casings.
• 1 x Spanner/Openning Tool
• 1 x LED Indicator Chrome Faucet
• 1 x 1 Micron Triple Gradient Sediment Filter
• 2 x 5 Micron Carbon Block Filters
• 1 x 0.0005 Micron Dupont Fimtec Membrane
• 1 x Alkalising/Mineralising Inline Filter
• 1x Reverse Osmosis Storage Tank (Standard being 8 Litres)
• Accessories & Adaptors (Flow Restrictor, Tank Valve, Drain Clamp, Auto Shut-off valve, Pressure Limiting Valve, Mains Connector/Mains Valve, Check Valve, Tee run…)

System components are made in manufacturing facilities certified by ISO 9001 and ISO 14001. All high pressure housings/casings are constructed out of chemical resistant reinforced polypropylene and is pressure tested beyond industry standards.

• Reverse Osmosis Tank, Certified to ANSI/NSF 58
• Reverse Osmosis Membrane, Certified by NSF International against NSF/ANSI Standard 58 for material requirements only for safe use in drinking water applications.
• Dedicated Chrome Chrome Tap, Certified to NSF/ANSI 61 Section 9-G. This faucet is Tested and Certified by NSF International against NSF/ANSI 42, 58 for materials and structural requirements.
• Sediment Filter, Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.
• Carbon Filter, Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

What are the chrome faucet specifications?

See Dedicated Chrome Faucet Specifications 

The system features a Chrome Faucet with a LED Indicator Light that will turn from blue to red when filters need changing. Certified to NSF/ANSI 61 Section 9-G. This faucet is Tested and Certified by NSF International against NSF/ANSI 42, 58 for materials and structural requirements.

If you do not want to drill a hole through your bench to install the dedicated faucet for your drinking water, you can replace your existing kitchen tap and consider getting a 3 Way Mixer. 3 Way Mixers provide hot, cold and filtered water, all in one faucet.

Reverse Osmosis Useful Links

• 📎  AquaCo Reverse Osmosis Brochure
• 📎  Reverse Osmosis Installation Guide
• 📎  AquaCo Reverse Osmosis Maintenance Guide
• 📎  Reverse Osmosis Rejection Removal List
• 📎  Bundle: Reverse Osmosis Replacement Filters Link

Reverse Osmosis Components

• 📎  Reverse Osmosis Storage Tanks
• 📎  Sediment Replacement Filter Link
• 📎  Carbon Replacement Filter Link
• 📎  Membrane Replacement Link

Chrome Dedicated Drinking Faucet

• 📎  Dedicated Faucet Product Link
• 📎  Dedicated Faucet Specifications
• 📎  Dedicated Drinking Faucet Installation Images