AquaCo PFAS Three Stage Whole House Water Filtration System

Name: AquaCo PFAS Three Stage Whole House Water Filtration System
SKU: SYS-WH203SCS-C-WAWF-1
Availability: InStock

$2,795.00 – $4,390.00 Inc. GST

AquaCo PFAS Three Stage Whole House Water Filtration System – Water Filtration Solution For Filtered Drinking Water Everywhere In Your Home.

Installation Service

Undersink Fluoride Reduction

Sediment Filter – Contaminant Reduction

Carbon Filter – Contaminant Reduction

Disruptor Filter – Contaminant Reduction

PFAS (“Forever Chemicals”)
- Removes >97.6% PFOA
- Removes >99.0% PFOS
- Tested using US EPA 537 methods for PFAS in drinking water.
Chlorine & Chloramines (Taste, Odour & Irritation)
- Removes >95.7% total chlorine (including chloramines)
- Removes 99.5% free chlorine
- Tested following NSF/ANSI 42 performance protocols and GB/T 5750.11-2023 drinking water test methods.
Heavy Metals
- Removes >99.5% lead (at pH 6.5)
- Removes >99.9% copper
- Tested using EPA Method 200.8 and Chinese Ministry of Health hygienic function standards for drinking water devices.
Bacteria & Viruses
- Removes >99.9999% total coliforms (bacteria)
- Removes 99.9995% MS2 coliphage (bacterial virus)
- Tested to GB/T 5750.12-2023 microbiological standards and EPA Method 1602 for MS2 coliphage.

Stage 1 – 100% Polypropylene Triple Gradient Sediment filter: Removes Dust, Sediment, Dust, Dirt, Rust, Sand, Slit, and Algae.
Stage 2 – Coconut Shell Activated Carbon Filter for effective reduction of chlorine, volatile organic compounds, Pesticides, herbicides, taste and odour from water.

Stage 3 – AquaCo® 20″ x 4.5″ Disruptor® BIO Filter Cartridge delivers advanced, broad-spectrum contaminant removal through its innovative multi-stage filtration design. This high-performance cartridge integrates several cutting-edge filtration mechanisms into a single compact unit:
- Electroadsorptive nanotechnology actively attracts and captures charged contaminants.
- Depth filtration ensures efficient particle removal throughout the entire media structure. High-surface-area nanofibers enable fine filtration down to submicron levels.
- Submicron membrane layers effectively trap viruses, bacteria, and microscopic debris.
- High-performance multi-media catalytic carbon block further reduces PFAS compounds (including PFOA and PFOS), heavy metals, chlorine, and volatile organic chemicals.
- The filter is also bacteriostatic, helping inhibit bacterial growth within the media. By combining mechanical filtration, adsorption, and electroadsorption in one system, the AquaCo® Disruptor® BIO cartridge provides comprehensive water purification for both residential and commercial applications.

To ensure optimal performance and hygiene and to prevent build up of contaminants, we recommend that filters are not used any longer than 18 months. However, replacement frequency depends on water quality and usage.
Filters should also be changed when rated capacity is reached, or when flow becomes too slow.

AquaCo Whole House Filtration System Servicing Video

System Dimensions: 600 W x 740 H x 220 D (mm)

Guidelines and Warnings

Where line pressure exceeds 520 kPa, a pressure limiting valve must be installed. Protect the housing from water hammer.
Use on cold water line only (with water up to 52°C). For installation over 52°C please enquire as to a suitable housing. Protect the housing from freezing.
Avoid installing in direct sunlight.
Use PTFE thread seal tape on all connections. Use of pipe sealants will void warranty.
Do not overtighten. Too much tape or over tightening may cause head to split.
For point of entry installations an approved dual check backflow prevention device must be fitted in accordance with national plumbing product codes.
Do not use with water that is microbiologically unsafe or with water of unknown quality without adequate disinfection.
This product must be installed in accordance with local plumbing regulations by a licensed plumber.

Sediment Filter – Certifications:
- Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only and and FDA CFR Title 21.
Carbon Filter – Certifications:
- Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.
Disruptor BIO Filter – Certifications

- Tested using US EPA 537 methods for PFAS in drinking water.
- Tested following NSF/ANSI 42 performance protocols and GB/T 5750.11-2023 drinking water test methods
- Tested using EPA Method 200.8 and Chinese Ministry of Health hygienic function standards for drinking water devices.
- Tested to GB/T 5750.12-2023 microbiological standards and EPA Method 1602 for MS2 coliphage.

Other Components – Certifications
- System WaterMark Certification No. 23448\
- Filters and Components are Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.
- Manufacturing facilities are ISO 9001 and ISO 14001 Certified.
- ISO 9001 is the ultimate benchmark for quality management, this means products meet expectations and quality standards.
- The ISO 14001 refers to the fulfilment in environmental performance requirements such as, resource efficiency, waste reduction, costs easing, environmental impact measurement and competitive advantage in supply chain design, these among others.

Compact Reverse Osmosis – Certifications
- Reverse Osmosis Membrane, Certified by NSF International against NSF/ANSI Standard 58 for material requirements only for safe use in drinking water applications.
- Dedicated Chrome Chrome Tap, Certified to NSF/ANSI 61 Section 9-G. This faucet is Tested and Certified by NSF International against NSF/ANSI 42, 58 for materials and structural requirements.
- Reverse Osmosis Tank, Certified to ANSI/NSF 58