AquaCo Triple Undersink with Sediment Fluoride and Carbon Filters

390 W x 330 H x 130 D (mm)

Sediment Filter – Contaminant Reduction

– Particles >1 micron………..…99.99%

Fluoride Filter – Contaminant Reduction

– Fluoride………………………………>97%

1 Micron Carbon Filter with lead removal media – Contaminant Reduction

– Particles >1 micron……………99.999% (0.4 Micron Nominal Filtration)
– Lead………………………….…………>90%+
– Chlorine………………………………>90%
– Chloroform…………………………>99.9%
– Copper………………………….……>99.9%
– Mercury………………………….…>99.9%
– Pesticides…………………………>97%
– Turbidity………………………………99%
– Oil Products…………………….…90%
– Cyst (Giardia, Cryptosporidium)…>99%

Performance has been tested and certified by independent laboratory testing in both Australia & the USA.

• Stage 1: 1 Micron Sediment Pre-Filter – Replace every year

100% Polypropylene Triple Gradient Sediment Filter.

Triple Gradient or Triple Layered means its outer layer has 10 microns, the middle layer has 5 microns and the inner layer (core) has 1 micron. This prevents filters blocking prematurely and provides a higher contaminant holding capacity. Instead of dirt building up on the outside, like regular sediment filters, dirt is trapped throughout the whole filter.

• Stage 2: 5 Microns Fluoride Removal Filter

Made in USA by Omnipure. Activated Alumina Media that removes up to 97% of fluoride in the water.

• Stage 3: 1 Micron Carbon Filter with Lead Removal Media – Replace every year

1 Micron Coconut Shell Activated Carbon Block with lead removal media

Made in USA by Omnipure.

• To ensure optimal performance and hygiene and to prevent build up of contaminants, we recommend that filters are not used any longer than 12 months. However, replacement frequency depends on water quality and usage.
• Filters should also be changed when rated capacity is reached, or when flow becomes too slow.

Click here to watch Twin Undersink Water Filter Servicing Video

Replacement Filters

• 📎Replacement Filters the AquaCo Triple Undersink Water Filters

AquaCo Twin and Triple Undersink Installation Images

AquaCo Water Filter Tap Installation Images

AquaCo Undersink Installation Guide

Usually the system is installed standing under the kitchen sink. This ensures a cost efficient fast installation. Where height is an issue, the system can be installed laying down as well. See installation diagram. 

Will this system reduce my TDS levels?

Unfortunately, unlike reverse osmosis systems, this system will NOT reduce Total Dissolved Solids (TDS), or Calcium Hardness. If you are interested in a system that reduces TDS or removes hardness from your drinking water consider our AquaCo Reverse Osmosis System, or for the whole house, consider our AquaCo Water Softener.

What’s the annual filters replacement cost: 

Click here to find prices for the replacement filters for the triple undersink water filters.

What’s the warranty?

All our filtration systems have 5* years warranty in parts and labour.

Can I see it?

You are cordially invited to view our extensive product range at our Showroom in Osborne Park. (Ample off-road parking available) Contact WA Water Filters Here!

If you can’t come to our showroom feel free to book a Virtual Product Rundown with one of our experienced technicians for a personalised session, explaining the product and answering any question you may have. Learning safely from the comfort of your home.

• Model: Triple Undersink With Sediment Fluoride and Carbon Filters
• Part Number: SYS-US925SFC
• Filtration Method: Mechanical, and Adsorption
• Filter Size: 9″ x 2.5″
• Filtration Stages: 3
• Brand: AquaCo
• Operating Temperature: 0.6 °C – 38 °C
• Operating Pressure: 25 – 80Psi
• Flow rate: 3 LPM
• Connection type: ¼” Quick connect John Guest hose fitting, ½” BSP Tee (Mains Connector)
• WaterMark certified: Yes
• Dimensions: 390 W x 330 H x 130 D (mm)
• Faucet Dimensions: 292 H x 80 W x 130 D (mm)
• Never install or operate where inlet water pressure may exceed 120 psi (827kPa)
• Protect from freezing. Remove filter if temperature drop below 1°C.

Contents:

• 3 x 9” x 2.5” Water Filter Housing Sump
• 1 x Stainless Steel Bracket
• 1 x Spanner
• 2 x 1/4″ Elbows
• 1 x ½” Tee – Mains Connector
• 1 x Blue Tube
• 1 x PLV 350kPa
• 1 x Chrome Faucet
• 2 x Screws
• 3 x Filter Cartridges
  • 1st Stage: SEDIMENT FILTER
  • 2nd Stage: 5μm FLUORIDE FILTER
  • 3rd Stage: 1μm CARBON FILTER

• Sediment Filter – Certifications:

Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

• Fluoride Filter – Certifications:

Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

• 1 Micron Carbon Filter with Lead removal Media – Certifications

Certified by NSF 42 and 53 for reduction claim and material requirements.

See Omnipure List of Certified products under NSF.

• Other Components – Certifications

• Drinking Faucet – Certifications

The system features a Chrome Faucet with a LED Indicator Light that will turn from blue to red when filters need changing. Certified to NSF/ANSI 61 Section 9-G. This faucet is Tested and Certified by NSF International against NSF/ANSI 42, 58 for materials and structural requirements.