9″ Sediment and Carbon Replacement Filters for Chlorine Taste and Odour, VOCs, Cyst and Lead Reduction

9″ x 2.5″ Each Filter.

Reduces:

Sediment Filter – Contaminant Reduction

– Particles >1 micron………..…99.99%

Carbon Filter – Contaminant Reduction

– Particles >1 micron……………99.999% (0.4 Micron Nominal Filtration)
– Lead………………………….…………>90%+
– Chlorine………………………………>90%
– Chloroform…………………………>99.9%
– Copper………………………….……>99.9%
– Mercury………………………….…>99.9%
– Pesticides…………………………>97%
– Turbidity………………………………99%
– Oil Products…………………….…90%
– Cyst (Giardia, Cryptosporidium)…>99%

Performance has been tested and certified by independent laboratory testing in both Australia & the USA.

• Stage 1: Sediment Pre-Filter – Replace every year

100% Polypropylene Triple Gradient Sediment Filter.

Triple Gradient or Triple Layered means its outer layer has 10 microns, the middle layer has 5 microns and the inner layer (core) has 1 micron. This prevents filters blocking prematurely and provides a higher contaminant holding capacity. Instead of dirt building up on the outside, like regular sediment filters, dirt is trapped throughout the whole filter.

• Stage 2: Carbon Filter – Replace every year

Made in USA by Omnipure. Coconut Shell Activated Carbon Media with Lead removal media.

• To ensure optimal performance and hygiene and to prevent build up of contaminants, we recommend that filters are not used any longer than 12 months. However, replacement frequency depends on water quality and usage.
• Filters should also be changed when rated capacity is reached, or when flow becomes too slow.

Click here to watch Twin Undersink Water Filter Servicing Video

Replacement Filters

• Replacement Filters the AquaCo Twin Undersink with Sediment and Carbon

AquaCo Twin Undersink Installation Images

AquaCo Twin Undersink Installation Guide

Usually the system is installed standing under the kitchen sink. This ensures a cost efficient fast installation. Where height is an issue, the system can be installed laying down as well. See installation diagram. 

Will this system reduce my TDS levels?

Unfortunately, unlike reverse osmosis systems, this system will NOT reduce Total Dissolved Solids (TDS), or Calcium Hardness. If you are interested in a system that reduces TDS or removes hardness from your drinking water consider our AquaCo Reverse Osmosis System, or for the whole house, consider our AquaCo Water Softener.

What’s the annual filters replacement cost: 

The annual replacement cost for Sediment, and Carbon is $85 for two filters.

What’s the warranty?

All our filtration systems have 5* years warranty in parts and labour.

Can I see it?

You are cordially invited to view our extensive product range at our Showroom in Osborne Park. (Ample off-road parking available) Contact WA Water Filters Here!

If you can’t come to

• Model: Sediment and Carbon Replacement Filters
• Part Number: REP-US925SC
• Filtration Method: Mechanical, and Adsorption
• Filter Size: 9″ x 2.5″
• Filtration Stages: 2
• Brand: AquaCo, Omnipure
• Operating Temperature: 0.6 °C – 38 °C
• Operating Pressure: 25 – 80Psi
• Flow rate: 3 LPM
• NSF certified: Yes
• For Cold water use only. Install on COLD water lines only.
• Never install or operate where inlet water pressure may exceed 120 psi (827kPa)
• Protect from freezing. Remove filter if temperature drop below 1°C.
• Bundle: Includes 2 Filters (Carbon Filter, and Sediment Filter)
• Carbon Filter Capacity: 7.500 Litres or 12 months.
• Sediment Filter Capacity: Dependant on Water Quality (6-12 months)

• Sediment Filter – Certifications:

Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

• Carbon Filter – Certifications

Certified by NSF 42 and 53 for reduction claim and material requirements.

See Omnipure List of Certified products under NSF.