STAINLESS STEEL SINGLE BENCHTOP WITH CARBON FILTER

140W x 300H x 110D (mm)

FITS ON SINGLE HANDLE OR DOUBLE HANDLE FAUCET

IF YOUR FAUCET IS WITH INNER THREADS OF SPOUT

1. TAKE OFF THE AERATOR FROM THE FAUCET

2. PUT THE ADAPTOR AND RUBBER WASHER INTO THE FAUCET AND TIGHTEN IT

3. REVOLVE DIVERTER VALVE INTO THE ADAPTOR

IF YOUR FAUCET IS WITH THREADS OUTSIDE OF SPOUT

1. TAKE OFF THE AERATOR FROM THE FAUCET AND REVOLVE THE DIVERTER VALVE INTO THE FAUCET DIRECTLY. PLEASE CHECK IF THERE IS AN O-RING INSIDE THE DIVERTER VALVE.

TO FIT TO NON-THREAD FAUCET

IF YOUR FAUCET IS 1/2″ OD ABD WITHOUT THREAD

1. INSERT RUBBER INTO EXTERNAL ADAPTOR.

2. PUT EXTERNAL ADAPTOR ON THE FAUCET AND TIGHTEN THE NOSE CLAMP BY SCREWDRIVER.

3. REVOLVE THE DIVERTER VALVE INTO THE EXTERNAL ADAPTOR.

IF YOUR FAUCET IS 3/4″ OD AND WITHOUT THREAD

1. PUT EXTERNAL ADAPTOR ON THE FAUCET AND TIGHTEN THE HOSE CLAMP BY SCREWDRIVER (NO NEED RUBBER)

2. REVOLVE THE DIVERTER VALVE INTO THE EXTERNAL ADAPTOR.

How often should I replace the cartridge?

• The Carbon filter can be replaced every year.

Contents:

• 1 x 9” x 2.5” Water Filter Housing Sump
• 1 x Ctop Stand
• 1 x Ctop Inlet
• 1 x Ctop Hose
• 1 x Ctop Adaptor
• 1 x Diverter
• 1 x Filter Cartridge
• Single Stage: CARBON FILTER

Dimensions: 140W x 300H x 110D (mm)