AquaCo Twin Premium PFAS Replacement Filters Pack 20″ x 4.5″

20″ x 4.5″ Each.

Sediment Filter – Contaminant Reduction

• Particles >5 microns……………99.999% (Sand, silt, rust, clay, algae)

Disruptor Filter – Contaminant Reduction

• PFAS (“Forever Chemicals”)
  • Removes >97.6% PFOA
  • Removes >99.0% PFOS
  • Tested using US EPA 537 methods for PFAS in drinking water.
• Chlorine & Chloramines (Taste, Odour & Irritation)
  • Removes >95.7% total chlorine (including chloramines)
  • Removes 99.5% free chlorine
  • Tested following NSF/ANSI 42 performance protocols and GB/T 5750.11-2023 drinking water test methods.
• Heavy Metals
  • Removes >99.5% lead (at pH 6.5)
  • Removes >99.9% copper
  • Tested using EPA Method 200.8 and Chinese Ministry of Health hygienic function standards for drinking water devices.
• Bacteria & Viruses
  • Removes >99.9999% total coliforms (bacteria)
  • Removes 99.9995% MS2 coliphage (bacterial virus)
  • Tested to GB/T 5750.12-2023 microbiological standards and EPA Method 1602 for MS2 coliphage.

• 1st Stage: PP-2045-5-WAWF, Triple Gradient ScaleStop® Sediment Filter
  • Removes Suspended Particles, Sand, Dirt, Rust, Clay, Mud, Sand, and Silt.
  • These filters have graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron catching smaller particles. Each cartridge is individually shrink-wrapped.
• 2nd Stage: DIS-2045-WAWF, AquaCo® Disruptor® Replacement Filter
  • Certified to reduce PFOA, PFOS, Chlorine, Taste, Odours, Heavy Metals (Copper, Lead…), Chloramines, Bacteria, Viruses, and Parasites.
  • Designed in Australia with German and Swedish Components.
  • The Disruptor® filter cartridge is an advanced, multi-layered filtration solution that integrates advanced electroadsorptive nanotechnology, premium-grade catalytic carbon, and a precision membrane layer to deliver unmatched contaminant removal and superior filtration efficiency in a single, compact unit. Engineered with patented filtration media and one of the industry’s most advanced carbon block formulations, the cartridge sets a new standard for performance in whole-house water treatment systems.

• Easy filter changes – Quick, simple “swap-out” design with no special tools required.
• Recommended replacement – Replace filters every 12–18 months. Actual replacement frequency will depend on your water quality and how much water you use. Leaving filters in service for too long can put stress on the housings and may lead to reduced filtration performance, leaks, or damage to the system.

Important: For both whole house and under-sink systems, filters are designed to be replaced before you notice a change in taste, smell or quality. We recommend following the service schedule rather than waiting for symptoms or relying on occasional water tests. This keeps your water consistently fresh and protects your system long-term.

There is no reliable way to visually inspect most filters. The only stage that will capture visible particles is the first-stage sediment filter, which removes dirt, sand, rust and other suspended solids. The following chemical or carbon stages work by adsorption – a microscopic process where contaminants bond to the filtration media. Because this happens at a molecular level, you can’t see when these filters are exhausted. Performance is determined by time in service, water quality and usage, not by appearance.

Click here to watch Whole House Water Filter Servicing Video

Whole House Water Filter Installation Images

Whole House Water Filter Installation Guide

Will this set up reduce my TDS levels?

Unfortunately, unlike reverse osmosis systems, these filters will NOT reduce Total Dissolved Solids (TDS), or Calcium Hardness. If you are interested in a system that reduces TDS or removes hardness from your drinking water consider our AquaCo Compact  Reverse Osmosis System, or for the whole house, consider our AquaCo Water Softener.

What’s the difference between Premium or Classic Filters?

Depending on the filters you choose, premium or standard filters, you can choose what contaminants to remove from the water. Whereas, classic filters only reduce chlorine, pesticides, herbicides and volatile organic compounds, premium filters remove the same contaminants, but also remove chloramines, heavy metals, viruses, parasites and bacteria. Dirt, sand, silt, rust and other sediments are removed in both options.

As a result, the water coming into your house will be free from dirt and the contaminants that concern you the most.

Can I change the filters myself?

Yes, we use simple twist-off housings and drop-and-go filter design for quick replacement.

An opening tool (spanner) is supplied for tightening and screwing the filter housings.

How long do the filters last?

Each set of filters lasts for up to 300,000 Litres (depends on water quality) or 12 months of use on average.

Also, because the filters are 20″ x 4.5″ in size, they offer twice filtration capacity compared to 10″ x 4.5″ filters. This also means that our 20″ x 4.5″ filters need changing every 12-18 months instead of 3-6 months like 10″ x 4.5″ filters.

What’s the difference between 20″ x 4.5″ and 10″ x 4.5″ Filters?

100% More Capacity – Our filters are 20” x 4.5″ in size, they double the contact time, flow rates, longevity and chemical removal rates, compared to smaller 10” x 4.5″ filters on the market.

• Operating Temperature: 2°C – 52°C
• Operating Pressure: 70 psi
• Flow Rate: 50-60 LPM

• For Cold water use only. Install on COLD water lines only.
• Never install or operate where inlet water pressure may exceed 90 psi (620 kPa)
• Protect from freezing. Remove filter if temperature drop below 1°C.

Components Included

• 1 x 20″ x 4.5″ Triple Gradient Sediment Filter
• 1 x 20″ x 4.5″ Disruptor for PFAS Removal

Guidelines and Warnings

• Where line pressure exceeds 70 psi, a pressure limiting valve must be installed. Protect the housing from water hammer.
• Use on cold water line only (with water up to 52°C). For installation over 52°C please enquire as to a suitable housing. Protect the housing from freezing.
• Avoid installing in direct sunlight.
• Use PTFE thread seal tape on all connections. Use of pipe sealants will void warranty.
• Do not overtighten. Too much tape or over tightening may cause head to split.
• For point of entry installations an approved dual check backflow prevention device must be fitted in accordance with national plumbing product codes.
• Do not use with water that is microbiologically unsafe or with water of unknown quality without adequate disinfection.
• This product must be installed in accordance with local plumbing regulations by a licensed plumber.

CLICK HERE – This link provides direct access to AquaCo certifications, testing standards, and product-specific approvals.