L-Series Sediment & Carbon Replacement Filters for Chlorine Taste and Odor Reduction

S&J Plumbing Services SJC10 Carbon Compatible Replacement Filters for Chlorine Taste and Odour Reduction

Name: S&amp;J Plumbing Services SJC10 Carbon Compatible Replacement Filters for Chlorine Taste and Odour Reduction
SKU: L5540x2
Availability: OutOfStock

$138.00 Inc. GST

Plenty River Plumbing PR100 Carbon PRC1 Compatible Replacement Filters

These are genuine Omnipure L-Series Filters modified to replace PRC1 Carbon Filters.

‣ Made in USA

‣ Reduce Chlorine, Taste, Odours, Cysts and VOC’s

‣ Combine mechanical filtration and physical absorption processes to reduce a wide variety of drinking water contaminants of both aesthetic and health concerns.

‣ Use Twist and Pull Plenty River Plumbing Technology *A patented keyed head design ensures each cartridge locks into place with 1/4 turn*

These filters work with water that has been previously disinfected. Not suitable with water that is micro biologically unsafe or of unknown quality without adequate disinfection before the system.

Available for pick up in-store only.

Out of stock

SKU: L5540x2 Categories: Caravan Filters, Replacement Filter Cartridges Tags: Replacement Filter Packs, Suit S&J Plumbing

S&J Plumbing Services SJC10 Carbon Compatible Replacement Filters for Chlorine Taste and Odour Reduction

For Chlorine Taste and Odour Reduction
Replaces SJC10 Carbon Filter
Bundle Includes 2 Carbon Filters
Model: SJC10 Compatible Filter

‣ These are 10″ x 2.5″ Filters

Operation

Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.

Maintenance Requirements

Note flow direction of filter.
Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
Replace cartridge when rated capacity (2,500 gallons) is reached, or when flow becomes too slow.
Install in compliance with state and local laws and regulations.

Pre-Filter Requirements

The Omnipure L5520 is usually installed with a sediment pre-filter L5505. As high sediments in water can block prematurely the L5520.
The Omnipure L5520 has 1 micron pore size; therefore, removes more contaminants compared to the L5540, which has 5 micron pore size.
Also, because the L5540 uses granular activated carbon and has 5 micron pore size, sometimes can be installed by itself, without a sediment pre-filter

Flow rate : 0 – 4 Lpm
Filter Micron Rating: 1 Micron
Max Pressure: 80Psi
Connection type: ¼” Quick connect John Guest hose fitting, ½” BSP Tee
Replacement Cartridge: Sediment and Carbon block, 1 Micron.
WaterMark certified: Yes