10″ Fluoride and Aragon Replacement Filters for Chlorine Taste and Odour, VOCs, Cyst, Lead, Fluoride, Chloramine, Bacteria and Viruses Reduction

10″ x 2.5″ Each

• Particles >2 microns……………99.999%
• Lead……………………………………99.95%
• Zinc, Cadmium…………………….100%
• Cesium……………………………….98%
• Chlorine………………………………100%
• Chloramines………………………..>90% +
• Fluorides…………………………..>90%+
• Pesticides……………………………97%
• Iron……………………………………..90%
• Aluminium……………………………97%
• Turbidity………………………………99%
• Oil Products…………………………90%
• Legionella……………………………99.99987%
• Salmonella Typhimurium……..99.998%
• Poliovirus…………………………….99.84%
• Rotavirus……………………………..99.99%
• Hepatitus A virus………………….96%
• Bacteria E.coli……………………..100%
• Pseudomonas aeruginosa……100%
• Colifag f-2……………………………100%
• Eterobacter cloaceae……………100%

Actual performance results may vary based on the level of organic contaminants in the influent water, changes in pH and upon other conditions that may be encountered during actual use.

• 1st Stage Filter: 100% Activated Alumina Fluoride Removal Filter.
  • Capacity: 800 Litres (6 Months)
  • Capable of filtering 97% of the fluoride and other unwanted chemicals within your water supply.
  • Porosity: 5 Micron Nominal

• 2nd Stage Filter: Filter with Aragon Polymers in the outer layer and coconut shell carbon with silver impregnated in the core.
  • Capable of filtering 30,000 litres in scheme water,  or 7,000 Litres at 0.3mg/l of iron at a flow rate of 3 lpm.
  • Combines Mechanical, Electrical, Adsorption and Ion Exchange filtration technologies
  • This filter works not only with Tap Water or Town Water, but also works for Rainwater, Spring Water, Dam Water and River or Creek Water.
  • Porosity: 0.5 Micron Nominal

• To ensure optimal performance and hygiene and to prevent build up of contaminants, we recommend that filters are not used any longer than 12 months. However, replacement frequency depends on water quality and usage.
• Filters should also be changed when rated capacity is reached, or when flow becomes too slow.

Click here to watch Twin Undersink Servicing Video

Twin Undersink Installation Images

Twin Undersink Water Filter Installation Guide

• Min. Operating Temperature: 0.6 °C
• Max. Operating Temperature: 38 °C
• Min. Working Pressure: 25 psi
• Max. Working Pressure: 125 psi
• Flow Rate: 3 LPM

• For Cold water use only. Install on COLD water lines only.
• Never install or operate where inlet water pressure may exceed 120 psi (827kPa)
• Protect from freezing. Remove filter if temperature drop below 1°C.

• Fluoride Filter Certifications:

Tested and Certified by NSF International under NSF/ANSI Standard 42 for material requirements only.

• Aragon Filter Certifications:

Certified by Institut Pasteur de Lille (France)
Certified by S.M Kirov Military Medical Academy (Russia)
Certified by The Research Institute of Influenza (Russia)
Certified by V.G Khlopin Radium Institute (Russia)
Certified by The Research Institute of Epidemiology and Microbiology (Russia)
Certifued by IFTS (France)
Certified by IAPMO (United States)
Certified by University of Ferrara (Italy)